I want a car that's shiny and clear. No sprains, no secrets. Toyota Summit Edition
      If you buy a car polisher because you want your car to be shiny and clear and save on expenses.
First of all, let's get to know the color of cars and then it will be easier to understand the steps.
Car paint is usually sprayed, plated, or coated in layers, layer by layer, until the color is beautiful.

Colors are divided into 4 main classes as follows:
1. Layer of steel or structural layer (metal/Body Panel) the part of the object used to paint the car.
2. Primer layer: This layer will be sprayed onto the structure. To help coordinate the adhesion between the paint and the structure.
3. Base Coat car paint layer (the paint layer that we see on red, black, and white cars). This layer will be sprayed over the base coat for all painted parts.
4. Lacquer layer (Clear Coat) This layer is the top layer of the car's paint. It is a layer of gloss and color protection. It's comparable to the film on our mobile phone screen.

A typical car lacquer layer has a thickness of 50-100 microns on average.
Using the correct machine and solution will not cause the car's paint to fade or have a negative effect on the car.

Equipment that must be prepared
- Car polisher
-milled wool leaves
- Glossy wool leaves
- Sponge type polishing blade to remove scratches
-Polymer clay for car polishing (if available)
-Fine liquid or cream for car polishing. That doesn't abrasive and isn't rough.
-Car coating liquid
- glossy wax
- Anti-scratch adhesive paper

Steps for making a beginner's version.
1. Wash your car thoroughly. Especially soil and sand grains should be cleaned thoroughly so that no dust particles remain that can cause scratches when scrubbing.
2. If you have car polishing clay Take the clay and scrub it with water. To collect dust and dirt particles first
3. Put anti-scratch adhesive tape along the edge of the rubber, the edge of the glass, and all the places you don't want the polisher to miss.
4. Bring the solution for polishing paint and pair it with the wool polishing blade or paint polishing blade that you have. Mix the solution with a little water and scrub it onto the surface. Points where you want to polish your car If you are not yet skilled, you should not press the machine too hard or soak the machine in one spot for a long time because it will cause the car's paint to thin and stain from the heat. Run the polisher along the plane of your car until you are satisfied. But you shouldn't scrub it too much.
5. Wash your car thoroughly and leave no polish residue left on your car. and blowing air Or wipe it completely dry.
6. Change the polishing blade to a varnish blade and use the varnish product you have prepared. Use in small quantities We recommend using a solution that also contains UV protection to protect the car's paint from fading during use. Use the polisher in a spiral motion all over the car in circular motion until you start to notice the clear shine of the car. At this stage, the car's wrinkles may be clearly visible from the increased shine of the car.
7. Change the polishing machine blades to sponge polishing blades. To keep the marks, use the polishing machine. and the color coating solution that you choose to use Scrub thoroughly in areas where the car has hair marks and lines to clean up the work.
8. You still shouldn't wash your car after coating. You should space out the car wash to allow the cream to fully absorb into the car's surface.

Just like this, everyone's car will be shiny and clear like new.
It may not seem difficult, but for those who have just done it. Still, you should not be impatient. You should use a polishing machine that is not very high if the machine has adjustable levels. Slowly polish until you become proficient and familiar with the machine first. Because if the machine is at the wrong angle or stumbles at some point will cause the machine to flicker Causing danger to you and your beloved car.

Or choose to use a service center that has standards and offers paint polishing services like Toyota Summit. We are ready and happy to serve you.